RSN - Naval surveillance relay
The naval monitoring relay RSN is a device intended for the protection of generator sets commonly used on board. It can be used in both naval and industrial installations. It is prepared for connection to a central control point by means of an RS485 bus, which allows both the configuration and the sending of operating data. It is also possible to adjust the relays via the potentiometers on the front panel and via the USB port. It is possible to configure the equipment through the USB port, without the need for auxiliary voltage. The design of the equipment ensures high precision, as well as allowing enormous flexibility in terms of the selection of output ranges, variables to be measured, and nominal scale values, as well as the possibility of having one input and one or two analogue outputs and up to two digital inputs. In addition to accuracy, special care has been taken to ensure robustness and reliability, as well as high electromagnetic immunity for use in harsh industrial environments, with high insulation characteristics.
The naval monitoring relay RSN is a device intended for the protection of generator sets commonly used on board. It can be used in both naval and industrial installations.
It is prepared for connection to a centralised control point via an RS485 bus, which allows both the configuration and the sending of operating data. It is also possible to adjust the relays via the potentiometers on the front panel and via the USB port. It is possible to configure the equipment through the USB port, without the need for auxiliary voltage.
The design of the equipment ensures high accuracy and allows enormous flexibility in the selection of output ranges, variables to be measured, and nominal scale values, as well as the possibility of having one analogue input and one or two analogue outputs and up to two digital inputs.
In addition to precision, special attention has been paid to robustness and reliability, as well as high electromagnetic immunity for use in harsh industrial environments, with high insulation characteristics.
Technical details
- Connections
- Dimensions
- Technical characteristics
- Technical data
- DIN rail
- Adjustment by potentiometers or by software
- Several programmable protection functions
- Two communication ports (RS485 or USB)
- Mosbus communication protocol
- Configurable via USB without auxiliary voltage
- 1 analogue input option
- Option of 2 digital inputs
- Option of 2 analogue outputs
- Average values
- AND and OR functions
ENTRANCE
- Rated voltage (Un): 3×400 / 690 V AC
- Continuous overload: 1.2 Un
- Instantaneous overload: 2 Un / 10s
- Current range: x/5 or x/1 programmable
- Continuous overload: 4 In
- Instantaneous overload: 20 In / 10s (max 75 A) - 80 In / 1s (max 300A)
- Own consumption: ≤ 0.2 VA / Phase
AUXILIARY VOLTAGE
- V Aux. AC / DC: 48 - 270 V
- Self consumption: ≤ 5W - ≤ 8 VA
EXITS
- Number of relays: 2
- Insulation: 5000 V AC
- Range: 250 V AC / 24 V DC, 8 A
- Maximum contact voltage and current: 400 V AC / 150 V DC, 10A
- Hysteresis: Programmable
- Response time: <320 ms
- Activation logic: Negative logic / positive logic with or without blocking circuit.
