M1DL3-MID Energy meter
The M1DL3-MID meter is a single-phase meter with RS 485 communication. This device is also an analyser, measuring up to 10 parameters of a single-phase system such as imported and exported active energy (EP+, EP-). The measured values can be viewed on the display or transmitted via the RS 485 port with Modbus RTU protocol. Its working temperature, according to the MID directive is -25 to +70ºC, temperatures recommended for electric vehicle charging installations. It complies with EN 50470-1/3 standards with accuracy class B for active energy and class 2 for reactive energy. It is intended for DIN rail mounting and indoor use. It is designed and manufactured for M1 mechanical and E2 electromagnetic environments in accordance with directive 2014/32/EU.
Technical details
- Connections
- Dimensions
- Technical characteristics
- Technical data
- DIN rail mounting
- LCD display
- 5 digits + 2 decimals
- 1000 imp/kWh verification LEDs
- RS 485 communication port
- Modbus RTU protocol
- With screw
Standards
- EN 50470-1
- EN 50470-3
- EN 62053-23
- DIN 43864
- EN 61010
ENTRANCE
- Rated voltage: 230 V AC
- Voltage measuring range: 230 V ± 20%
- Nominal current: 0.25 - 5 (100) A
- Current measuring range: 0 - 100 % IMAX
- Starting current: 20 mA
- Frequency: 50 Hz or 60Hz
- Network type: 1P2W
- Own consumption: < 10 VA, < 1 W
ENVIRONMENT
- Degree of protection: IP51
- Electromagnetic environment: E2
- Mechanical environment: M1
- Average relative humidity: ≤ 75 %
- Maximum relative humidity: ≤ 95 % (Non-condensing)
- Operating temperature: - 25 / + 70 ºC
- Storage temperature: - 25 / + 70 ºC
OTHER CHARACTERISTICS
- Auxiliary voltage: Self-powered
- Baud rate: 9600 / 11115 bps
- Housing material: PBT, PC
