AC voltmeters with rectifier
Voltmeters with a moving coil and rectifier system are designed to measure alternating voltage (AC) while maintaining the accuracy and linearity advantages of DC instruments. The built-in rectifier converts the AC signal to DC, allowing the moving coil mechanism to operate correctly. This results in a fully linear scale and indication starting from zero, giving a clear, accurate and sensitive reading. It is intended for use in installations where an accurate display of small variations and a stable response are required.
Voltmeters with a moving coil and rectifier system are designed to measure alternating voltage (AC) while maintaining the advantages of accuracy and linearity of DC instruments.
The built-in rectifier converts the AC signal to DC, allowing the moving coil mechanism to operate correctly. This results in a fully linear scale and indication starting from zero, giving a clear, accurate and sensitive reading.
It is intended for use in installations where an accurate display of small variations and a stable response are required.
Technical details
- Technical characteristics
- Technical data
DIN rail
CC5VRG - 45×52,5 mm DIN - 0,15kg
Scale 90º Lateral
CC5VG - 48x48mm - 0,14kg
CC4VG - 72x72mm - 0,2kg
CC3VG - 96x96mm - 0,28kg
CC2VG - 144x144mm - 0,5kg
Scale 90º central
CCb7G - 80x64mm - 0,15kg
CCb3G - 105x80mm - 0,19kg
CCb8G - 130x100mm - 0,25kg
Scale 240º.
CC5CG - 48x48mm - 0,20kg
CC4CG - 72x72mm - 0,32kg
CC3CG - 96x96mm - 0,38kg
CC2CG - 144x144mm - 0,68kg
Frequency: 50 or 60 Hz
Accuracy: 1,5 %
RATIO VOLTMETERS
Measuring range (Vn): x/100V or x/110V
DIRECT VOLTMETERS
Measuring range (Vn): 6; 10; 15; 25; 30; 40; 50; 60; 100; 150; 250; 300; 400; 500 or 600 V






