DISPLAY HMI SBT-D

Categories:
Description: The SBT-D display is a device controlled by means of an RS 485 serial port that allows writing texts in a table with 2 columns and 8 rows. In turn, the display has 4 contactless capacitive keys that can be used to interact between the control system and the user.

To complete this product, it will be necessary to purchase the low voltage supervisor SBT4V-5C and the communication center SBT-C.

Connections

Dimensions

  • It has 2 columns and 8 rows
  • Up to 16 alphanumeric characters can be written in each cell
  • The header text can be changed at the top of the display
  • This text supports a total of 32 characters

GRAPHICS SETTINGS

  • Define the background color of the header
  • Define the color of the header text
  • Set the background color of each cell individually
  • Set the text color for each cell individually
  • Define the color of the lines that make up the table

COMMUNICATIONS SETTINGS

  • Define Modbus Identity
  • Define the communication speed: variables between 1200 and 38400
  • Define the data format: N.8.1; O.8.1; E.8.1; No.8.2
  • Define the lighting on time: 0 always ON. Variables between 1 and 100 minutes
  • Set display brightness: Between 0 (less bright) and 4 (more bright)

COLOR DEFINITION (RGB 565)

  • Each color register is 16 bits long
  • 5 bits correspond to red
  • 6 bits correspond to green
  • 5 bits correspond to blue

CAPACITIVE KEYBOARD

  • 4 capacitive keys
  • Key control by interlocking to avoid loss of information
  • Keys are uniquely identified in the Modbus register
  • The interlocking of the keys is done individually
  • In the interlock, pulsation and pulsation time are recorded
  • The interlock clearing process is performed jointly for all keys
  • In addition to the interlock, an instantaneous registration of the keys is also maintained

 

Ask information

DISPLAY HMI SBT-D

Ask information

DISPLAY HMI SBT-D