|
3 NETWORK ANALYZERS ANG96
1- ANG96 STANDARD VERSION 2- ANG96 ETHERNET TCP/IP VERSION 3- ANG96G GENERATOR VERSION
|
|
– LCD 128×64 DISPLAY, WITH BACKLIGHT.
– TRUE RMS VOLTAGE AND CURRENT MEASUREMENT. – HARMONIC DISTORTION (THD on V and I). – MAXIMUM DEMAND A,KW,KVA,KVAR – MAXIMUM AND MINIMUM VALUES |
INPUT | OUTPUT | ||
Nominal voltage: | 0 – 500 V A.C | Relays: | 250 V A.C, 3A |
Nominal current: | 1 and 5 A | Pulse mode: | 60 ms. |
Frequency: | 50 – 60 Hz | Serial port: | RS485 |
Auxiliary supply: | 85-264 V A.C / 80-300 V D.C | Protocol: | MODBUS RTU |
Consumption: | <4 VA | Baud rate: | 1200-19200 bps |
Overload: | 2In permanent, 20 In 1s | Connection: | Two wire |
1,2Vn permanent, 2 Vn 10s |
|
- TCP/IP protocol in an Ethernet RJ 45 connector used to connect to an existing Ethernet network..
- The equipment only needs to be configured with an own IP, The netmask IP, The gateway IP and a free TCP port communicated with any internal or external equipment.
- Instalations with emergency generator, frequent network failures…
- ANG96G has an analog input used to distinguish between the authoritiy or an external electrical generator. It permits to measure the energy from the authority or from the generator in independents counters.
|
Download Datasheets:
1-ANG96 standard 2-ANG96 EThernet 3-ANG96G Generator
ANG96 Standard (I)
ANG96 Ethernet version(I)
ANG96G Generator version (I)